Mica Sealing Bar
This custom mica sealing bar heater offers even heat distribution and replaces a more expensive alternative. Previously the client was using a costly machined block, which was bored for cartridge heaters. This custom mica heater was designed and profiled for even heat distribution (+-5°F) across the entire bar. The resulting setup is a thin mica heater sandwiched and bolted between two plates for optimum heat transfer.

FEATURES
- Evenly distributed heat
- Uniform across the bar
- Cost savings

Engineering service and support is a big part of what we do. Offered on an application by application basis. With over 2,000 unique heating element designs, chances are we have done something similar to your project.

Component air heater for medical imaging. Climate controlled system produces higher quality CT scans. Contact us with your unique heating needs.
Get info
Our solution solved a heater failure problem & reduced cost for a medical device manufacturer. Contact us with your unique heating needs.
Get info
Tutco-Farnam designed a custom self-regulating electric air heater that fits the desired space on its own expandable platform...
Get info
Compact air heater for medical patient comfort system. The heater operates safely near operating room equipment. Contact us with your unique heating needs.
Get info
We have a customer who makes high-performance ink drying equipment. They couldn't pack enough wattage into their air knives.
Get info
Complete thermal system for product packaging. An air heater & blower shrink wrap product for shipping. Contact us with your unique heating needs.
Get info
Tutco Farnam designed a large single piece mica surface heater with distributed wattage and plenty of extras to achieve even heating and reduced cost for our customers.
Get info
TUTCO-Farnam has designed hundreds of heaters for surgical, laboratory, and patient comfort applications, including oxygen and ventilation warming.
Get info
A customer was using a light bulb to heat a small pneumatic delivery enclosure for moisture and cold weather protection. Rising costs...
Get info
OEM equipment manufacturers rely on the precision of TUTCO Farnam’s heat solutions in many medical warming applications, including the warming of contrast mediums used in x-rays, CT scans and MRIs.
Get info
Miniature air heater for a medical lab device. The heater aids in blood sample preparation. Contact us with your unique medical heating needs.
Get info
Heated air curtains provide comfort in colder climates by blowing a warm stream of air over people as they cross through the air screen.
Get info
Rugged open coil air heater withstands high velocity air streams to achieve drying time in under a minute. Contact us with your unique heating needs.
Get info
Our solution solved a heater failure problem & reduced cost for a medical device manufacturer. Contact us with your unique heating needs.
Get info
Custom surface heater for heat press. Longer lasting, lower cost alternative to the existing heating element. Contact us with your unique heating needs.
Get info
Diffused air heater for circuit board manufacturing. Pre-heats circuit boards during the assembly process. Contact us with your unique heating needs.
Get info
Temperature distribution improved by 50%. Better heating performance with a 40% reduction in cost.
Get info
Tutco-Farnam designed a custom self-regulating electric air heater that fits the desired space on its own expandable platform...
Get info
Tutco-Farnam developed a low-mass open coil heater for installation in a tubular duct.
Get info
A custom heater with reduced heat loss, even surface heating and longer life. Designed for intimate surface contact covering over 100% of the area.
Get info
Tutco-Farnam created a silicone rubber heater for a tire refill station at a 20%-25% savings for the client.
Get info
We have a customer that makes air conditioners for product vending enclosures. Our heater speeds up evaporation of condensate.
Get info
TUTCO Farnam specializes in the design and engineering of high-quality custom heaters and heating elements.
Get info
The TUTCO Farnam engineering team build custom Kapton® heaters featuring high efficiency temperature control to heat cryogenic liquids.
Get info
TUTCO Farnam developed a 100% custom control panel for one of our customers who’s application required removing moisture from a powder.
Get info
Canned Heat is commonly used in the catering business to keep food warm. Some facilities don't allow an open flame.
Get info
A customer that makes enrobing equipment for the confectionery industry was seeking a better solution for heating and melting chocolate.
Get info
Miniature air heater for a laboratory device. The heater delivers hot air for a zero clearance scientific probe. Contact us with your unique heating needs.
Get info