Heat Torch™ 200
The Heat Torch™ 200 is engineered to satisfy the most demanding requirements. It is contained in a 2” diameter stainless steel pipe and is available in three sizes. The 5” long heater body is for power ratings from 1000 to 4250 watts [with power increments of 250 watts]. The 9” long is for power ratings of 4500 to 8500 watts [with standard power increments of 500 watts]. The 13” long heater is for power ratings from 9000 to 12000 watts [with standard power increments of 1000 watts].
The Heat Torch™ 200 has an allowable air flow ranging from 9.6 to 100 SCFM . Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) the maximum output temperature. Standard inlet fitting is a 1” NPT female. Standard outlets are 1 1/4” female NPT fitting or no exhaust fitting.
This Heat Torch™ 200 service applications include high capacity staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing, and air knives. Designed to heat any non-combustible gas.
|Max Watt||Max Inlet||Max Exhaust||Min SCFM||Max SCFM||PSIG*|
|12500 W||250 °F||1300 °F||9.6||100||120|
- MountingHorizontal / Vertical
- Leads12 Gauge, 12" long
- Heater BodyStainless Steel
- Heater FittingsStainless Steel
Applications for the Heat Torch™ 200 include
- High Capacity Staking
- Heat Shrinking
- Adhesive Activation
- Air Scrubbing
- Air Knives
|Wattage||Minimum Flow Required at Max Power Inlet Air Temperature 72°F (SCFM)|